FEATURES: •Suitable for above and in-ground ponds •Energy efficient and quiet •Thermostat for precise control •400% more efficient than alternative forms of pond heating •Titanium heat exchanger . Temp rise and fall 2 deg •Available for immediate shipment •National support & helpline available SIZE: W x D x H (mm) 930 x 360 x 550 Noise output: 47db FAQ's Why choose a Heat Pump? Simply because it’s inexpensive - to buy - to run - to install. What the other heat pumps cannot offer you is both the heat efficiency and low running cost! How Do Heat Pumps Work? The Azuro Water Heat Pump is a very efficient way to heat your pond. It makes full use of the advanced refrigeration technology to capture the heat in the outside air and transfer it to the pond water. Environmental refrigerant gas absorbs and transfers the great heat energy through the refrigeration circulation system. The fan circulates air through the outer Evaporator Air Coil that acts as a heat collector. The liquid refrigerant in the air coil absorbs the available heat in the air transforming it to a gas. The refrigerant gas is then pumped by the Compressor. When this warmed gas is compressed, it intensifies or concentrates the heat. This intensely hot gas is then pumped into the Heat Exchanger Condenser where the actual heat exchange takes place. As the pond water passes through the Heat Exchanger, the hot gas gives up its heat to the cooler pond water. The refrigerant returns to a liquid state and is pumped through the Expansion Valve and then into the Evaporator Air Coil to start the process over again. An Azuro Water heat pump does not generate heat, it simply captures it and moves it from air to water thus, providing an efficient and environmentally friendly system for heating your pond! Titanium Exchanger? Many heat pump suppliers are promoting the benefit of Titanium Heat Exchangers (coil in which the pond water passes). All standard Scott heat pumps have a Titanium heat exchanger. The Titanium heat exchanger has a life expectancy which is much longer (up to three times) than the standard copper exchanger (15 years). In the case of heat pumps, if a water heat exchanger gets a hole in it (usually due to corrosion) and pond water enters the sealed refrigeration system, the entire heat pump is ruined. The AzuroTitanium Water Heat Pump virtually eliminates all the chemical corrosion. It will guarantee the heat pump to operate well for many years and avoid creating expensive repairs and lengthy shutdown of the heater. Without question, having a Titanium heat exchanger is beneficial due to the life expectancy but please bear in mind that a the standard exchanger still has a life expectancy of 15 years!
Shott Interline Heat Pump Installation Manual.pdf
Azuro Titanium Heat Pump Technical Details:
Model No. | 4.6kw | 8.5kW | 10.5kW |
Heating output at 25°C (kW) | 4.6 | 8.5 | 10.5 |
Power Consumption (kW) | 0.9 | 1.6 | 2 |
Rated current (amps) | 4.3 | 7.9 | 9.8 |
COP for heating at 25°C ambient air temperature | 4.5 | 5.3 | 5.3 |
Recommended fuse (amps) | 10 | 20 | 20 |
Advised pool volume (m3) | 0-20 | 0-20 | 20-40 |
Water pipe dia. (mm) | 50 | 50 | 50 |
Refrigerant (kg) | 0.8 | 1.1 | 1.3 |
Compressor type | Rotary | Rotary | Rotary |
Heat exchanger | Titanium | Titanium | Titanium |
Noise at 1 metre (dB) | 46 | 47 | 48 |
Dimensions L x W x H (cm) | 76x27x51 | 96x31x56 | 101x31x61 |
Net / gross weight (kg) | 35/39 | 54/57 | 65/67 |